Carisma Coanda CCN - CCN-ECM

Carisma Coanda CCN - CCN-ECM

Thanks to the particular air handling section, Carisma Coanda cassette units generate an air flow with a "coanda" effect. The unit is suitable for installation in a suspended ceiling. Air intake is from the bottom while the air supply is parallel to the ceiling through practical and functional intake and outlet grids. 
The "coanda" effect creates excellent circulation of the air inside the room. Ec motors allows the decrease of electric consumption by more than 50% compared to traditional asynchronous motors. They enable to control the air flow continously and the ambient temperature with precision, with further benefits in terms of very low noise levels thanks to the reduced average working speed. 
Every unit can be supplied with 1 coil (two pipe system) and possibly an electric heating system, or with 2 coils (four pipe system) with one or two rows, for water supply at a low temperature. Fresh air can be mixed with room air. 
A condensate pump may also be supplied as an accessory. In addition to the conventional temperature and speed control systems, there is also the possibility to control operation of each unit through a single remote with central supervisor software installed on a PC (Sabianet).
Skystar - Skystar ECM

Skystar - Skystar ECM

Innovative and fascinating design, seven different models, high control flexibility, ease of maintenance: the SKYSTAR water cassette is the result of significant technical and design research focused on providing an avant-garde product in terms of performance, low noise and control flexibility. 
SkyStar ECM series uses an innovative brushless electric motor controlled by an inverter card that varies the air flow continuously by means of a 1-10 V signal generated by Sabiana controls (version SK-ECM-IR) or by independent contollers (version SK-ECM). The extreme efficiency, also at a low speed, makes possible a great reduction in electric consumption (more than 75% less in comparison to a traditional motor) with absorption values, under normal operating conditions, that are no greater than 10 Watt in the entire range.
The dimensions of the first sizes are designed to fit into 600x600 mm false-ceiling modules, while the larger sizes, measuring 800x800 mm, stand out for their low noise and the excellent price-performance ratio 
Each model can be supplied with a single coil (two pipe system) and electric heater, or with two coils (four pipe system). The fresh air can be mixed with the ambient air and distributed into separate rooms. All the sizes have 6 speed fans, with 3 speeds connected electrically, so as to extend operating flexibility even during the commissioning of the installation. 
The condensate drain pump is very silent and has a maximum discharge head of 650 mm. 
As well as the traditional temperature and speed control systems, the fan speed can be varied automatically, multiple units can be managed from just one control panel, and the control board for each unit can be installed in a remote position as to simplify service operations. In addition, each unit can be managed by remote control. The units can also be controlled by the most common building management and supervision systems. Finally, various types of valves are available (two and three way, 24 V, modulating 0-10 V). 
Carisma Fly

Carisma Fly

Carisma Fly is the high wall fan coil unit designed and manufactured in Italy by Sabiana, in 4 sizes and many different models. 
Fly is easy to install like a standard fan coil: without decreasing the emission and without any extra frame, 2 way or 3 way valves and condensate pump can be mounted into the casing. 
The modern and appealing design of the unit in RAL 9003 colour allows the use of Fly in any environment. 
Fly is available with standard AC motors or low energy EC motors and in the following versions: with wired wall control, infra-red remote control, MB electronic board for Modbus management and electric heating coil. 
The units are for 2 pipe installations only. 
All the Fly models perform very low electric consumption and extremely quite sound levels according to the request of today’s new projects.
Meltemi door curtains

Meltemi door curtains

The range of MELTEMI SABIANA air curtains offers maximum flexibility in the protection of doors and open access compartments. Available in fan only versions, with water coils and electric heaters, Meltemi air curtains are offered in 3 different versions, according to the installation high: from 2,5m to 4,5m, also recessed, and with lengths of 1, 1,5 and 2 m. Possible applications include civil, commercial and industrial environments.

Their versatility means that the individual units can be joined to form a single air curtain of the desired length to protect wide openings. Each unit can be operated by remote control or by supervision systems using a Modbus communication protocol. The peculiar air intake grille allows to retain the coarse dust acting as a filter that can be easily cleaned by vacuum cleaner or anti-static cloth.
Krio water chillers

Krio water chillers

The KRIO water chillers and heat pumps are available in a wide range of solutions: with helicoidal fans, centrifugal fans, heat pump, air and water cooled. The 21 standard sizes have capacities up to 155 kW, with higher capacity units available upon request. 
The optimum sizing of the components in the circuit, the use of scroll compressors and electronic control of the fan speed, means the units are very silent, sturdy and ideal for outdoor installation, thanks to the painted galvanised panelling. Compact dimensions and simple installation mean they can be used in any situation.
Atlas ECM

Atlas ECM

Since 1950 Sabiana has been manufacturing hot water, high temperature hot water and steam unit heaters for heating industrial and commercial environments, with proprietary manufacturing technology and a wide range of solutions.In all the European countries the most common heating system for industrial environments uses hot water unit heaters connected to a central heating system.The excellent ratio of indoor comfort to system cost, continual improvements in efficiency of hot water production, using both condensing boilers and heat pumps, the use of specific solutions such as flow optimisers on the units, as well as flexible installation and easy adaptation to new production plant layouts even after installation, mean that still today thousands of designers and businesses propose and adopt this heating solution.A further development is proposed in this catalogue:every model is provided with an electronic motor controlled by a built-in inverter. The ECM motors allow electric energy saving if compared to traditional asynchronousmotors and they enable to continuously adjust the air flow and control the ambient temperature with precision, with further benefits in terms of very low noise levels.All range is compliant with the new ERP 2013 Regulation (EU) No. 327/2011 which requires very low electric consumption ratings in relation to performances provided.Sabiana is the leading manufacturer of unit heaters, and competes worldwide providing the latest technology in environmental comfort.
Carisma Floor CFP-ECM

Carisma Floor CFP-ECM

Carisma Floor CFP-ECM fan coils represent a combination of innovative aesthetics and functionality in an air conditioning system. They are designed to efficiently heat, cool and ventilate buildings with large windows or doors. The wide range of models includes solutions which can be customised depending on architectural requirements with diffusion grids in a variety of materials and colours. All the units are supplied with low energy consumption electronic motors. A large variety of control and regulation accessories is available. Floor fan coils are used inside private homes, on verandas, in public offices and buildings and in exhibition 
and commercial areas.  The choice of Carisma Floor appliances has a host of advantages: • Low energy consumption ECM motor - Low noise
- Flexibility
- Advanced design
- Easy to install
Carisma CFR/CFR-ECM

Carisma CFR/CFR-ECM

Carisma CFR fan coils were designed to meet the frequent requirement in homes of combining the typical qualities of radiators, such as reduced depth and quiet operation, with the typical quality of fan coils for controlling the climate in environments all year round with a high comfort air outlet temperature. They are available into main versions: with front radial panel or with front panel for covering only.  In winter, the first solution provides both a convective and radiant thermal exchange, further improving the feeling 
of well being.  All models can be supplied with low energy consumption electronic motors.  On demand, recessed versions, horizontal ceiling mounted versions and 4-pipe systems are available for installation in non-residential buildings.  4 sizes are available, with: - air flow rates from 100 to 575 m3/h - heating yield from 0.64 to 4.10 kW - cooling yield from 0.38 to 3.31 kW
Carisma Breeze

Carisma Breeze

The need to combine functionality with practicality and aesthetics led to the creation of Breeze, a recessed kit designed for Carisma CRC and Carisma CRR fan coils. With Breeze, the fan coil literally 'disappears' into a niche of the wall and you can cover it with a panel that can be painted with your colour of choice, so that it is completely invisible.  In other words, the advantages of a form of air-conditioning that uses natural fluids, with low energy consumption, combined with the benefits of an almost non-existent visual impact. The recessed Breeze kit by Carisma is available in 3 sizes and allows for the recessed installation of Carisma fan coils on the wall. The Breeze solution is available for:  CRC-IV in the following sizes: 2 – 3 – 4 – 5 – 6 and CRR-IV in the following sizes: 2 – 3 – 4  The recessed box is made of galvanised sheet metal and has suitable openings to facilitate the electrical and hydraulic connection of the fan coil. Electronic controls  For vertical fan coils the ambient temperature can be controlled through the use of electronic thermostats installed on board with different solutions depending on needs. The range of controls includes versions for the manual or automatic control of ventilation, control of the water valves or electric resistance, manual/centralised/automatic summer/winter switching. There are versions to control the asynchronous motor and versions to control the inverter electric motor. 
 Wall-mounted electronic controls For fan coils and cassettes the ambient temperature can be controlled through the use of wall-mounted electronic thermostats with different solutions depending on needs. The range of controls includes versions for the manual or automatic control of ventilation, control of the water valves or electric resistance, manual/centralised/automatic summer/winter switching. There are versions to control the asynchronous motor and versions to control the inverter electric motor. 
 Control and supervision panel for PSM-DI terminal units. Up to 60 (cassette/fan coil units) can be installed in series, managing them with a single intelligent wall-mounted control, by using the serial communication possibilities of the appliances. Set the operation conditions and modes of each individual connected appliance, the switch-on and off time bands for each day of the week and display the operation conditions of each individual appliance from the wall-mounted control(the program can be set for all equipment or for a maximum of two groups of equipment). Two or more intelligent wall-mounted controls are required if connecting more than 60 units. Each unit must be equipped with an MB card. More appliances, with a maximum of 60 units (RS 485 serial connection maximum development of 800 metres) can be managed with the PSM-DI panel, from a single control point. 

InoxSabiana GE

InoxSabiana GE

InoxSabiana GE 25 and 50 series is the result of an innovative design aimed to obtain a high quality, versatile and easy to assembly product. The choice of materials, use of the advanced construction techniques, the care paid to each accessory, European standard 305/2011 compliant, the continuous product and production process control assure absolute reliability of the Sabiana Flues. Stainless Steel AISI 316L inner wall is 0,5 and 0,6 mm thick, while outer wall is made of Stainless Steel 0,5 mm thick or alternatively copper, 0,6 mm thick. Assembly between elements is executed by quick –fit type flange with a nipple: the mechanical seal is achieved by “Vee” bend on the inner wall of the flue system. The insulation is rock wool with minimum density of 90 kg/m3 or needled rock wool 25 and 50 mm thick.
The longitudinal welding of the inner and outer wall of each element is microplasma while the 90 ° tee is achieved through a deep drawing process that avoids the welds. All non-insulated elements are in stainless steel AISI 304 (aluminum adjustable flashing and storm collar). Moreover, thanks to the implementation of an innovative fixing system , the thermal bridge between inner and outer wall is reduced to a minimum.
InoxSabiana GE 25 and 50 series includes 11 different internal diameters ( from 150 to 600 mm ) and a full set of accessories , able to solve any problem related to the evacuation of the flue gases of the generators , co-generators , internal combustion engines and turbines .
Comandi Ventilconvettori

Comandi Ventilconvettori

Centralised control system for the management of a network of fan coil units and Cassette units with an electronic interface card (MB series) installed on them. Consisting of a hardware unit, box PC with Linux operating system and a pre-installed management software program. Network supervision function with the option of defining weekly operating programs and special programs for groups or individual units, with visualisation of data related to the log and any alarms. The system communicates with the MB network cards through a RS485 serial line Carisma Multizone is an advanced air distribution system intended for applications in residential or small commercial areas, suitable for centralised systems with the need to adjust the comfort of every room to individual needs. It can be applied on ducted Carisma CRSO and Carisma CRS-ECM fan coils. The system is fitted with an electronic control that can manage different temperatures through variable air flow rates in each air-conditioned area. The system is equipped with an electronic control that can manage different temperatures and air flow rates in each air-conditioned area. Thanks to the available controls, one can have a separate programming for the various areas; the system can also be interfaced with Modbus supervision systems. The motorised dampers are modulating devices with adjustable stroke and managed by the electronic control. The plenum is delivered with all its components (power board, regulator for asynchronous motor or ECM and motorised dampers) already assembled. The plenum and Fan Coil are equipped with quick-coupling terminal blocks. A wall-mounted controller flush with Multizone (also serving as an area sensor) must be provided for each system, plus a flush area Sensor for every area up to 4 per system (5 areas in total considering the wall-mounted controller flush with Multizone). The connection between the Plenum, wall-mounted controller and zone sensors must be carried out with the Multizone communication cable.  
Energy Plus

Energy Plus

The high-performance heat recovery units of the Energy Plus series units have been designed to allow you to save energy in the ventilation systems of public and private premises, such as bars, restaurants, offices, shops, etc. They allow you to recover heat from the exhaust air and transfer it to the air introduced into the environment. The heat exchange between the exhaust air and the intake air takes place through a static heat exchanger with countercurrent flow, sized to obtain a heat recovery up to 94%. The Energy Plus series includes 4 sizes suitable for horizontal installation and covers a range of flow rates from 300 to 2600 m3/h. The units are available both in the version for installation on ceilings and the floor-mounted version. The Energy Plus units are ERP 2018 and therefore comply with the regulatory requirements of the European Ecodesign Directive (EU Regulation 1253/14). The checks are related to both heat recovery energy performance and the intrinsic energy consumption parameter SFPint in the nominal conditions declared by the manufacturer.
Energy Smart

Energy Smart

The Sabiana Energy Smart units are high efficiency ventilation units with heat recovery and are designed for residential applications. The units replace the stuffy air of indoor environments with filtered air coming from the outside thanks to a special F7 class microfilter. The hexagonal counterflow heat recovery unit avoids any winter heat losses due to the introduction of fresh air, thereby recovering up to 91% of the extraction heat and conveying it towards the incoming fresh air provided in the occupied room. Moreover, each unit is fitted with a medium efficiency filter (M5) installed at the extraction air inlet in order to avoid any duct infiltration inside the equipment. All Energy Smart units comply with the 2018 efficiency limits imposed by Regulation 1253/14. As well as the type of installation, the range can also be classified based on the type of control: • Pro unit with automatic centralised control with humidity probe: ENY-SP (vertical) ENY-SHP (horizontal) • Standard unit with time programming control: ENY-S (vertical)
Titan

Titan

The Titan Air Handling Units are built in accordance with European regulations and directives and they are certified EUROVENT. Titan AHU could be selected according to performance compliant to European Commission Regulation No. 1253/2014 (Ecodesign Directive).

The main defining feature of this new series concerns the special design of the aluminum frame that makes up the structure, aimed at creating perfectly smooth inside walls, without gaps or protrusions, so as to simplify

cleaning and allow access to the components from the side. The basic configuration is made of sandwich, nominal thickness 50 mm, with the outside surface made from pre-painted galvanized steel and the inside surface of galvanized steel, with high density polyurethane foam thermal insulation in between, making the unit suitable for indoor and outdoor installation.The variants of the basic configuration include stainless steel or Peraluman inside panels, Peraluman outside panels and mineral wool insulation so as to guarantee maximum safety in the event of fires (no toxic gases are released), with effective sound absorption. The constructional versatility and the wide range of components allow technical and dimensional solutions that can respond to any need. The systems are available as packaged units or a series of modular components, in a horizontal arrangement, with two overlying levels, or in a vertical arrangement. The structure of the base, made from thick galvanized plate section bars, guarantees maximum stability and uniform weight distribution. Centrifugal fans are normally used in all versions: forward curved, backward inclined or plug fans. All the electric motors can also be inverter-driven.

The heat exchange coil can be built to handle different heat carrier fluids, such as: hot, superheated or chilled water, steam, ethylene glycol mixes, halogenated refrigerants, etc., or alternatively can be electrically powered. The air filters, the heat recovery units, the humidification systems and all the other components are selected or developed based on the latest technology. The extensive range of performance, the vast availability of components and accessories, the multiple constructional variants featured for both the standard and custom configurations, and the high quality of the materials used make this series of units, in terms of value-for-money, some of the most reasonably priced and appealing on the market.

Carisma Floor CRP-ECM

Carisma Floor CRP-ECM

Carisma Floor CRP-ECM fan coils represent a combination of innovative aesthetics and functionality in an air conditioning system. They are designed to efficiently heat, cool and ventilate buildings with large windows or doors. The wide range of models includes solutions which can be customised depending on architectural requirements with diffusion grids in a variety of materials and colours. All the units are supplied with low energy consumption electronic motors. A large variety of control and regulation accessories is available. Floor fan coils are used inside private homes, on verandas, in public offices and buildings and in exhibition 
and commercial areas.  The choice of Carisma Floor appliances has a host of advantages: • Low energy consumption ECM motor - Low noise
- Flexibility
- Advanced design
- Easy to install